All guides

Choose a crop

Tap the fruit you want to grow. Pomegranate opens the full field guide, guava and dragon fruit open their guide sections, and every other crop takes you to its varieties.

Pomegranate varieties we sell

Tap a variety to see its details, price and spacing.

Read this guide in your language

Pick the language you read most comfortably. The whole guide is translated for you, section by section.

Pomegranate · complete guide

Pomegranate: the complete field guide

From deciding whether the crop suits your land, to variety choice, bahar management, blight control and the last picking — the whole cycle in one place. Figures follow ICAR, ICAR-NRCP Solapur and MPKV Rahuri recommendations; doses are a starting point to confirm with your local KVK.

20 min read · updated November 2026

Spacing

4.5 × 3 m

Plants per acre

About 300

First harvest

Year 3

Fruit maturity

110–130 days

Bearing yield

20–25 t/ha

Orchard life

20+ years

Technical specification

Pomegranate at a glance, in numbers

Botanical name
Punica granatum L.
Family
Lythraceae
Recommended varieties
Bhagwa, Phule Bhagwa Super, Phule Arakta, Mridula, Ganesh, Phule Anardana
Planting material
Healthy hardwood or air-layered plants, 45–60 cm tall, disease free
Spacing
4.5 × 3 m; widen to 5 × 4 m on rich soils
Plant population
About 740 plants per hectare (300 per acre)
Pit size
60 × 60 × 60 cm, refilled with soil, FYM and single super phosphate
First commercial crop
Year 3; full bearing from year 4
Fruit maturity
110–130 days after fruit set, 16–17° Brix
Bearing yield
20–25 t/ha in well-managed Bhagwa orchards
Economic life
20 years and more with annual pruning
Soil
Light to medium, well drained; pH 6.5–7.5, tolerates up to 8.5
Irrigation
Drip, 4–8 litres per plant per day by age and season
Climate
Warm and dry, distinct hot summer, dry ripening period

Contents

Step 1 · Decision

Is pomegranate the right crop for your land?

Pomegranate tolerates heat, drought and poor soil better than most fruit crops, which is why it spread across the dry belts of Maharashtra. It does not tolerate waterlogging, heavy shade or careless spray habits. Check these six points before you spend on plants.

  1. 1

    Climate

    Warm, dry weather with a distinct hot summer suits it. It handles 45°C and short spells near freezing, but the best colour and sweetness come from a dry ripening period. Long humid spells during fruit development invite bacterial blight, so avoid the heaviest rainfall belts unless you are ready for a strict spray calendar.

  2. 2

    Soil

    Light to medium, well-drained soil with pH 6.5 to 7.5 is ideal. It tolerates pH up to 8.5 and salinity up to about 6 dS/m. Heavy black soil that holds water is the single most common reason orchards die young: if your land puddles after rain, plan raised beds and open drains first.

  3. 3

    Water

    One borewell or farm pond that can run drip through April and May decides the crop. Pomegranate survives stress, but a commercial crop needs steady water from flowering to fruit fill, and a controlled dry spell before bahar.

  4. 4

    Capital and patience

    Planting, trellis-free but staking, drip, and two years of care before any real income. Plan for 3 years of cost before the first paying crop, and about 7 to 8 years to recover it in a well-managed orchard.

  5. 5

    Labour

    Pruning, bahar treatment, bagging and 2 to 3 pickings are all hand work. A family can run 2 to 3 acres; beyond that you need reliable hired hands for the pruning and harvest weeks.

  6. 6

    Market

    Bhagwa-type fruit sells on colour, size and shine. If your nearest mandi discounts small or dull fruit, plan for bagging and grading from year one, or tie up a buyer before planting.

One crop season a year is the rule, not three. Taking repeated bahars from the same tree is how orchards exhaust themselves and how blight becomes permanent.

Step 2 · Variety

Choosing the variety

Variety decides your market more than your yield does. Bhagwa and its MPKV selections dominate Maharashtra because of rind colour, soft seeds and shelf life. Figures below are from MPKV Rahuri release data and ICAR variety lists.

VarietySourceFruitWhy growers pick it
BhagwaMPKV Rahuri, 2003405–420 g, glossy saffron rind, soft seedsThe market standard. Good for export and domestic trade, resistant to internal breakdown, moderately susceptible to thrips and leaf spot.
Phule Bhagwa SuperMPKV Rahuri, 2013271–299 g, dark saffron glossy rind, very juicyHigher anthocyanin and juice, about 30 kg per tree, about 22.6 t/ha. Attractive peel lifts the price.
Phule AraktaMPKV Rahuri, 2003About 183 g, red skin, bold blood-red arilsSoft sweet seeds, good for long-distance transport, about 22 t/ha. Slightly smaller fruit than Bhagwa.
MridulaMPKV Rahuri, 1994300–350 g, reddish-brown skin, deep red arilsSweet, soft-seeded, travels well. A dependable older choice where Bhagwa colour is hard to achieve.
GaneshRFRS Ganeshkhind, 1952About 270 g, yellow with red tingeHardy and water-stress tolerant, about 10 t/ha. Very susceptible to blackening of arils and to nematodes.
G-137MPKV Rahuri, 1984About 330 g, yellow with red tinge, TSS 16.4%Larger arils than Ganesh, sweet. Same weakness: blackening and nematodes.
Phule AnardanaMPKV Rahuri, 2015About 279 g, acidic, hard seedsGrown for anardana processing, not the fresh market. About 14% anardana recovery.
  1. 1

    Match the variety to the buyer, not the brochure

    For the fresh and export trade, Bhagwa or Phule Bhagwa Super. For distant mandis where fruit travels by truck, Phule Arakta or Mridula. For a processing contract, Phule Anardana. Ask your buyer which rind colour they pay for before you order plants.

  2. 2

    Buy only certified, disease-free planting material

    Take hard-wood cuttings or air layers from a nursery that can show you mother plants and a nematode-free record. A cheap plant carrying blight or wilt costs you the whole block. Ask for the variety name in writing.

  3. 3

    Plant two or three varieties in blocks

    Not mixed row by row, but in separate blocks. It spreads your harvest window and your market risk, and makes spraying and picking easier to organise.

Step 3 · Establishment

Land preparation and planting

Planting is a two-week job that decides the next twenty years. The pit, the graft or cutting position and the first irrigation matter more than anything you do later.

  1. 1

    Fix the spacing first

    The commercial standard is 4.5 m × 3 m, about 740 plants per hectare or roughly 300 per acre. The older 5 m × 5 m gives about 400 per hectare and suits spreading types like Ganesh. Farmers around Solapur and Sangola also use 2.5 m × 4.5 m with staking and harder pruning. Tighter spacing means more plants, more pruning and more disease pressure: only take it if you can keep the canopy open.

  2. 2

    Lay out north to south

    Rows running north to south give both sides of the canopy light through the day. Mark the pits with stakes and a rope before digging, and leave 3 to 4 m at the boundary for movement of a sprayer and a tractor trolley.

  3. 3

    Dig pits three weeks ahead

    Pits of 60 cm × 60 cm × 60 cm. On shallow or heavy soil, go 75 cm deep and add a 10 cm layer of sand or gravel at the bottom for drainage. Let the pit weather for two to three weeks; never plant into a pit filled the same day.

  4. 4

    Backfill with the right mix

    Topsoil plus 10 to 15 kg well-rotted farmyard manure and 250 g single super phosphate per pit. Mix thoroughly, refill to ground level, and water once so the soil settles before planting.

  5. 5

    Plant in June–July, or February

    The main planting season in Maharashtra is with the monsoon in June–July; February planting works where irrigation is assured. Plant on a cloudy afternoon, never in the heat of the day.

  6. 6

    Set the plant at the right depth

    Keep the root collar 2 to 3 cm above the soil line and the graft union well clear of the soil. Firm the soil in two layers so no air pocket remains around the roots. Stake the plant immediately and tie loosely with a soft band.

  7. 7

    Water the same day

    Give 10 to 15 litres immediately, then every 4 to 5 days until new growth appears. After that move to your normal drip schedule. Keep a 1 m clean basin around each plant and mulch with dry matter kept 10 cm away from the stem.

Never plant pomegranate where an old pomegranate orchard stood and wilted. The wilt pathogen survives in the soil and in old roots for years.

Step 4 · Year one

Building the frame in the first year

A pomegranate is trained as a bush on 4 to 5 stems, not as a single-trunk tree. What you allow in year one becomes the permanent frame of the plant.

  1. 1

    Select 4 to 5 main stems

    About 3 to 4 months after planting, choose 4 or 5 well-spaced, upright shoots arising between 20 and 40 cm from the ground. Remove every other shoot below and above them. The centre must stay open so light reaches the lower canopy.

  2. 2

    Remove every flower

    Any flower that appears in the first year must be removed. Let the plant put that energy into roots and frame. This one decision is worth more than an extra fertilizer dose.

  3. 3

    Keep the basin clean

    Weed the basin every three weeks and mulch with dry crop residue. Pomegranate roots are shallow and hate competition. Do not hoe deep near the stem.

  4. 4

    Feed lightly, often

    Follow the young-orchard row of the fertilizer table in Step 6, split into small doses with the irrigation. Overfeeding nitrogen in year one gives you soft, blight-prone growth.

  5. 5

    Watch the first monsoon

    Check drainage after every heavy spell. One week of standing water in the first year can kill a plant or leave it stunted for life. Re-stake after storms.

Step 5 · Flowering season

Bahar management: deciding when the tree flowers

Pomegranate flowers three times a year, and the grower chooses which one to keep by withholding water. This is the single most important management decision of the year: it fixes your harvest date, your price and your disease risk.

BaharFloweringHarvest in MaharashtraTrade-off
Ambe baharFebruary–MarchJune–AugustThe most planted season. Fruit ripens in the dry months with good colour, but the market is crowded with everyone else's Ambe crop.
Mrig baharJuly–AugustNovember–JanuaryHighest yields, good fruit size. Ripening overlaps the monsoon, so bacterial blight pressure is heaviest. Needs the strictest spray discipline.
Hasta baharSeptember–OctoberFebruary–MarchOff-season fruit, usually the best price. Needs assured water and a well-built tree; yields are lower than Mrig.
  1. 1

    Stress the tree, then release it

    Stop irrigation 45 to 60 days before the bahar you want. The leaves begin to yellow and the tree goes into rest. Do not stress a young tree in its first two years, and never stress a weak or blight-infected orchard.

  2. 2

    Defoliate and prune on the same day

    When most leaves have yellowed, strip the remaining leaves by hand and prune in the same operation. Remove all previous-season fruiting shoots, dead wood, water shoots and inward branches. Keep 4 to 5 stems and an open centre, and hold the canopy at about 2.5 to 3 m.

  3. 3

    Spray before and after leaf fall

    Spray 1% Bordeaux mixture before defoliation, then clean the orchard: collect fallen leaves and prunings and burn or compost them outside the block. Immediately after pruning, spray 0.5% Bordeaux mixture or copper oxychloride 2.5 g/L with bronopol 0.5 g/L.

  4. 4

    Paste the stems

    Paint the stem from ground level to 1.5 to 2 feet with red soil paste or 10% Bordeaux paste. This is the cheapest blight and borer protection you will buy all year.

  5. 5

    Give the first irrigation and start the crop

    Water immediately after pruning, then follow the schedule in Step 7. If leaf fall is uneven, ethephon 39% at 0.5 ml/L with DAP 5 g/L can be used, up to three sprays 5 to 7 days apart, with the last one raised to 1 to 1.5 ml/L only if yellowing is still incomplete. Do not overdose ethephon.

  6. 6

    Take one bahar a year

    ICAR-NRCP recommends a single crop season per year with a rest period of 2 to 3 months and a stress period of 1 to 2 months. Orchards forced for two or three crops decline within a few years and lose blight resistance.

Step 6 · Nutrition

Fertilizer and nutrition

ICAR recommends 600 to 700 g nitrogen, 200 to 250 g phosphorus and 200 to 250 g potash per bearing tree per year, with 25 to 30 kg farmyard manure. Young orchards scale that down by age. Get a soil test before you start: the table below is a starting point, not a prescription.

Age of treeFYM (kg/plant/year)N (g)P₂O₅ (g)K₂O (g)
Year 110200100100
Year 215300150150
Year 320400200200
Year 425500200250
Year 5 and after25–30600–700200–250200–250
  1. 1

    Split the annual dose

    Half at bahar treatment and half about 4 to 6 weeks after fruit set. A single heavy dose at pruning is wasted: the tree cannot take it up and the rain washes it away.

  2. 2

    Feed through drip where you can

    Fertigation in 8 to 10 weekly splits from flowering to fruit fill gives the best response, especially on light soil. Reduce nitrogen sharply after fruit fill begins; excess nitrogen gives soft fruit, poor colour and more blight.

  3. 3

    Do not skip micronutrients

    Spray a micronutrient mixture at 1.5 to 2 g/L at flowering, fruit set and again during fruit enlargement. Zinc and boron matter most: boron deficiency shows up as cracked fruit and corky skin.

  4. 4

    Build organic matter every year

    Along with FYM, ICAR-NRCP recommends bio-formulations such as Aspergillus niger AN 27 at 1 kg per acre a month after the first irrigation, Penicillium pinophilum at 3 kg per acre, and arbuscular mycorrhizal fungi at 1 kg per acre placed in the root zone. Incubate the bio-agents in well-decomposed FYM for 10 to 15 days under shade before applying.

Step 7 · Water

Irrigation through the season

Pomegranate is drought tolerant but not drought loving. Uneven watering causes fruit cracking, and excess water at ripening dilutes sugar and invites blight.

StageWaterWhat to watch
Newly planted (0–3 months)10–15 L per plant every 4–5 daysKeep the root zone moist, never soggy
Young orchard, drip4–6 L per plant per dayRaise in summer, cut back in winter
Bearing orchard, drip8–12 L per plant per day in summer; 4–6 L in winterAdjust to soil type and canopy size
Flowering and fruit setNo stress at allThe most sensitive stage of the year
Fruit developmentSteady, uniform supplyWet-dry swings crack fruit
20 days before harvestReduce, then stopRaises TSS and reduces cracking
Bahar stress periodNo irrigation for 45–60 daysUntil leaves begin to yellow
  1. 1

    Use drip with a separate line per block

    One line for the orchard, one for the boundary plants, and a valve per block so you can stress one block for bahar without starving another.

  2. 2

    Never irrigate by flooding in heavy soil

    Basin flooding in black cotton soil keeps the root zone wet for days. If you must flood, cut the basin short and open a drain.

  3. 3

    Mulch to hold moisture

    A 10 cm layer of dry residue in the basin cuts evaporation, keeps soil temperature even and reduces cracking after a dry spell.

Step 8 · Canopy

Pruning year by year

Pruning decides fruit size and colour far more than fertilizer does. An unpruned pomegranate carries too many small fruits in shade and gives the market nothing to grade.

  1. 1

    Year 1

    Choose 4 or 5 main stems. Remove all other shoots and every flower. Do not tip the main stems: let them grow and build the frame.

  2. 2

    Year 2

    Retain the chosen stems, remove water shoots growing upright from the centre, and keep the middle open. Allow a small crop if the frame is strong.

  3. 3

    Year 3 onwards, at every bahar

    Remove all shoots that carried fruit in the previous season, along with dead wood, crossing branches, water shoots and anything growing inward. Keep 4 to 5 stems and 12 to 20 well-spaced fruiting shoots per stem. Hold the canopy at 2.5 to 3 m so spraying and picking stay easy.

  4. 4

    Rest after harvest

    After the last picking, clean the orchard, remove dropped and mummified fruit, and let the tree rest for 2 to 3 months before the next bahar treatment.

Step 9 · Plant protection

Pests and diseases, in order of danger

Bacterial blight is the disease that ends pomegranate orchards in Maharashtra. Wilt and fruit borer come next. Everything else is manageable with scouting, traps and rotation. The schedule below follows the ICAR-NRCP integrated management approach.

ProblemWhat you seeWhat to do
Bacterial blightWater-soaked spots on leaves, black spots on fruit, L-shaped cracks on twigsOrchard hygiene is the real cure: remove and burn fallen leaves and prunings, paste stems, spray copper and bronopol from the start of the crop. No chemical rescues a neglected orchard.
WiltOne side yellows, then the whole plant collapses; wood shows dark streaksRemove and destroy the plant with its roots, do not replant in the same pit for 2 to 3 years, apply Trichoderma-enriched FYM to the surrounding plants.
Fruit borer (anar butterfly)Bored entry hole on fruit, frass and rotting pulp, fruit dropsRemove and destroy every affected fruit, bag fruits with white non-woven bags, spray chlorantraniliprole 18.5% SC at 0.75 ml/L or spinosad 45% SC at 0.5 ml/L at the right stage.
ThripsSilvery streaks and curling on young leaves, scabby patches on fruit skinBlue and yellow sticky traps at 10 to 12 per acre, thiamethoxam 25% WG at 0.5 g/L, rotate with spinetoram or flonicamid.
Mealybug and stink bugWhite waxy clusters on shoots and fruit, sooty mould, stained fruitNeem oil 10000 ppm at 3 ml/L, buprofezin 25% SC at 1 to 1.5 ml/L with a sticker, control the ants that farm them.
Shot hole borerSmall holes on stems, gum oozing, sawdust-like frassPrune and burn affected shoots, keep the stem pasted, spray into the holes and seal them with clay.
Anthracnose and fruit spotSunken black spots on fruit, rotting in humid weatherPropineb 70% WP at 3 g/L or tebuconazole with trifloxystrobin at 0.5 g/L; remove infected fruit early.
Root-knot nematodeStunted growth, poor response to fertilizer, galls on rootsUse nematode-free planting material, apply neem cake, Paecilomyces lilacinus and mycorrhiza in the root zone.
  1. 1

    Start with the spray before defoliation

    1% Bordeaux mixture before leaf fall, then 0.5% Bordeaux or copper oxychloride 2.5 g/L with bronopol 0.5 g/L immediately after pruning. The rest of the calendar is much easier if this one is not skipped.

  2. 2

    Follow the crop calendar, not the panic

    The ICAR-NRCP schedule runs by days after defoliation: 0 to 14 days defoliation sprays, 15 to 21 days first leaf flush with salicylic acid and sticky traps, 22 to 50 days flowering with NAA and a fungicide, 50 to 70 days fruit set, 71 to 100 days fruit enlargement, 100 to 150 days second enlargement with bagging. Keep a 7 to 10 day interval in Mrig bahar and 10 to 14 days in Hasta and Ambe.

  3. 3

    Rotate the chemistry

    Never spray the same fungicide or insecticide twice in a row. Alternate copper, mancozeb combinations, strobilurins and triazoles, and alternate insecticide groups as well. Resistance builds fast in blight and thrips.

  4. 4

    Respect the waiting period

    Note the pre-harvest interval of every product you use and stop accordingly before picking. Fruit that fails a residue test at the mandi costs more than the spray saved.

  5. 5

    Note on streptocycline

    Streptomycin with tetracycline was the old standby for blight, but the Government of India moved to ban the combination from January 2024. Use bronopol, copper and salicylic acid based options and follow your state agriculture department's current advisory.

These are indicative recommendations from ICAR-NRCP's integrated schedule. Product availability, banned molecules and doses change: confirm the current approved list with your KVK or the district agriculture office before spraying.

Step 10 · Fruit quality

Thinning, bagging and the cracking problem

Two months of small interventions decide whether your crop sells at a premium or as a clearance lot.

  1. 1

    Thin the crop

    Where clusters set heavily, remove the small and misshapen fruits so the rest can size. Growers who thin lose a little in count and gain much more in price per kilogram.

  2. 2

    Bag the fruit

    Cover fruits with white non-woven bags about 30 to 40 days after fruit set, or once fruit is marble sized. Bagging is the most reliable protection against fruit borer, fruit fly, sunburn and bird damage, and it lifts the colour and shine. ICAR-NRCP lists bagging or orchard netting as the main non-chemical defence.

  3. 3

    Control cracking

    Cracking comes from uneven water, boron and calcium deficiency, and sudden rain after a dry spell. Fix it with steady drip, mulching, boron sprays at 0.2 to 0.3% during fruit development, and by stopping irrigation well before harvest.

  4. 4

    Prevent sunburn

    Fruit on the exposed western side scorches in April and May. Bagging, a light shade net over young blocks, or whitewashing exposed branches all help. Keep enough leaf cover by not over-pruning.

  5. 5

    Harvest at the right maturity

    Late picking is the main cause of aril browning and poor shelf life. Watch the colour and sugar, not the calendar alone.

Step 11 · Harvest

Judging maturity and picking

A pomegranate does not ripen after picking. What you harvest is what you sell.

  1. 1

    Use these maturity signs

    Rind turns from green to the variety's colour and turns glossy; the calyx opens and dries; the fruit gives a metallic sound when tapped; TSS reaches 16 to 17°Brix, which you can check with a small refractometer; a ripe fruit sinks in water while an immature one floats.

  2. 2

    Time it from flowering

    Most commercial varieties take 110 to 130 days from flowering to harvest; Bhagwa in Maharashtra is normally picked about 4 to 4.5 months after the bahar is taken. Keep the date of your first flowering written down.

  3. 3

    Pick in 2 to 3 rounds

    Fruit on the same tree does not ripen together. Pick the ready fruit every 10 to 15 days, harvesting in the early morning. Cut the stalk with secateurs, leaving about 1 cm attached; never pull the fruit off the tree.

  4. 4

    Handle like glass

    Put fruit straight into a padded crate, never tip it from a height, and never let it sit in the sun after picking. Bruised fruit rots within days and spoils the whole box.

Step 12 · After harvest

Grading, packing and storage

Grading is where a mixed lot becomes money. A buyer pays for uniform size and clean skin, not for average weight.

  1. 1

    Grade by size and appearance

    Separate into large, medium and small lots, and remove cracked, sunburnt and diseased fruit before packing. Most buyers work in rough size bands such as above 350 g, 250 to 350 g and below 250 g.

  2. 2

    Clean and cool the fruit

    Wipe the fruit, and where the buyer expects it, dip in a permitted fungicide or wax emulsion and shade-dry. Keep harvested fruit in the shade and move it to a cool room the same day.

  3. 3

    Pack for the distance it travels

    Corrugated fibre board boxes of 4 to 5 kg with paper or foam wrap between fruits for distant markets; shallow crates for the local mandi. Do not overfill: pressure at the bottom of the box is what cracks fruit in transit.

  4. 4

    Store short and cold

    At 5 to 7°C and 85 to 90% relative humidity, well-graded Bhagwa fruit holds for 2 to 3 months. Do not store fruit with ethylene-producing produce, and do not store cracked fruit at all.

  5. 5

    Clean the orchard before you rest it

    Collect and destroy dropped, rotten and mummified fruit, clean the drains, service the drip lines and let the block rest. What you leave on the ground in June is next season's blight.

Step 13 · Economics

Yields, costs and honest numbers

Yields vary more in pomegranate than in almost any other fruit, because blight and management decide everything. Use these ranges for planning, not for promises.

  1. 1

    Yield you can plan for

    Traditional orchards yield about 8 to 12 tonnes per hectare. Well-managed Bhagwa-type orchards reach 20 to 25 tonnes per hectare; MPKV lists about 22 to 22.6 t/ha for Bhagwa and Phule Bhagwa Super, with Phule Bhagwa Super at roughly 30 kg per tree.

  2. 2

    When income starts

    A small crop in year 3, a commercial crop from year 4, and full bearing from year 5. An orchard can keep bearing for 20 years or more if blight and wilt are kept out.

  3. 3

    Where the money goes

    Planting material and drip in year one; labour for pruning, bahar treatment, bagging and picking every year; and sprays, which are the largest recurring cost in a blight-prone area. Bagging costs money and pays back in grade and reduced loss.

  4. 4

    What actually decides profit

    Not the yield alone, but the share of A-grade fruit, the season you choose and whether you sell to a mandi or a buyer. Two growers with the same tonnage can differ by 40% in income on grade alone.

Where these figures come from

Published recommendations, not guesswork

Variety data, spacing, nutrition and the spray schedule in this guide are drawn from the sources below. Your soil, water and local disease pressure decide the final doses: run a soil test and confirm the spray list with your KVK or district agriculture office.

Want this planned for your block?

Send us your district, water source and area, and we will suggest varieties, spacing and a bahar calendar for your conditions.